Install a replacement 3M MP8755 projector lamp

Written by
  • Shelagh M.
  • 9 years ago

3M_MP8755_projector_3M_78-6969-8919-9_EP1635_replacement_projectorReplace the 3M MP8755 projector lamp using this guide.

Watch for end of life warning signs

You need to change the 3M MP8755 projector lamp when the lamp indicator lights up red and “CHANGE THE LAMP” message appears on the screen. Another indication is an image that looks washed out or with colors that are distorted. Your 3M MP8755 projector uses the 3M 78-6969-8919-9 projector lamp.

Invest in authentic

One of the best things you can do to keep your 3M MP8755 projector working at its best it to invest in an ,OEM projector lamp. Counterfeit “compatible” lamps are NOT authentic lamps and can create a number of problems including:

Invest in an authentic and look for the seal of approval before buying.

Buy this lamp on Amazon sold by these authorized dealers:

Replacing the projector lamp

Before replacing the 3M MP8755 projector lamp, follow these safety steps:

  • Wait until the projector is cool to the touch before removing the lamp. This projector works at a high temperatures and you can get badly burned.
  • Be sure to unplug the projector before replacing the 3M 78-6969-8919-9 lamp.

NOTE: The 3M 78-6969-8919-9 projector lamp contains mercury and should not be thrown into regular garbage. Recycle this lamp.

  • The 3M MP8755 projector lamp access door is located on the bottom of the projector. Turn over the projector onto a soft surface to loosen the screw holding the cover in place.
  • Remove the cover. Place it to one side.
  • Unscrew the two projector lamp screws. Grasp the lamp module with one hand and the projector body with the other hand. Carefully slide the lamp module out. Take care not to bang the actual 3M 78-6969-8919-9 projector lamp or it may break. Learn how to do a proper clean up if the lamp breaks or explodes.
  • Insert the new 3M 78-6969-8919-9 projector lamp. Tighten the two screws on the new projector lamp.Being careful not to touch the actual bulb as the oil from your fingers will burn black marks when the lamp heats up. Re-install the 3M MP8755 projector lamp cover.

Reset the lamp timer

After changing the 3M 78-6969-8919-9 projector lamp you need to reset the lamp timer so the 3M MP8755 projector will turn back on. To reset:

  • To display the total lamp hours, press and hold for 3 seconds, the RESET button on the projector or Timer button on the remote control.
  • To reset the lamp timer, press the RESET button on the projector or MENU button on the remote while the total lamp hours are displayed. Use the arrow button on the projector or remote to select ZERO or CANCEL.

Extend the 3M MP8755 projector lamp life

  • Keep your air filters clean to avoid overheating the projector.
  • Turn off the 3M MP8755 projector projector projector and let it stand for at least one hour ever 24 hours. An average use of four to five hours per day will ensure longer lamp life.
  • Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
  • Learn more with Top tips for extending DLP projector lamp life

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.