When to replace the Sanyo POA-LMP65 projector lamp

Written by
  • Shelagh M.
  • 10 years ago

Sanyo POA-LMP65 service part no 610 307 7925Have your noticed dim light on your screen or colors that are not natural looking on your projector? Is there a yellow flashing light on your projector top panel? These are warning signs that your Sanyo POA-LMP65 (service parts no 610 307 7925) lamp is approaching its end of life and should be replaced immediately.
When to replace the Sanyo POA-LMP65 projector lamp

Projectors using the Sanyo POA-LMP65 (service parts no 610 307 7925) lamp:

The Sanyo POA-LMP65 (service parts no 610 307 7925) should last between 2,000 to 3,000 hours before it needs to be replaced. Be sure to purchase an authentic version of this lamp bought from a verified source. When you purchase from a guaranteed supplier you’ll be getting a lamp specifically manufactured to meet the specifications of your projector.
The cheaper counterfeit models may be tempting since they are lower in price but they can end up costing more in the long run, especially when they damage the sensitive mechanisms in your Sanyo projectors.

Sanyo_bulb_replacementLooking for a less expensive option? Are you technically saavy?  Watch our step-by-step video on replacing only the Sanyo POA-LMP65 (service parts no 610 307 7925) bulb instead of the entire lamp housing.

Scroll down for links to step-by-step instructions on replacing the Sanyo POA-LMP65 (service parts no 610 307 7925).

When the lamp life is used up and at 0 hour, the Lamp replacement icon will appear on screen, indicating that is it’s urgent to replace the Sanyo POA-LMP65 (service parts no 610 307 7925) lamp.
You must wait for 90 seconds after changing Lamp Mode before you can access this option again.

For step-by-step instructions on replacing your Sanyo POA-LMP65 (service parts no 610 307 7925) lamp, click on your model listed below:

Sanyo PLC-SL56, Sanyo POA-LMP65 service part no 610 307 7925
Sanyo PLC-SL56, Sanyo POA-LMP65 service part no 610 307 7925

 
 

Click here for step-by-step instructions on how to change the Sanyo POA-LMP65 (service parts no 610 307 7925) for theSanyo PLC-XU56 projector.

 
 
 

Sanyo PLC-XE20 projector, Sanyo POA-LMP65 service part no 610 307 7925

Sanyo PLC-XE20 projector

 
 

Click here for step-by-step instructions on how to change the Sanyo POA-LMP65 (service parts no 610 307 7925) for the Sanyo PLC-XE20 projector.

 
 

Sanyo PLC-SU51 projector, Sanyo POA-LMP65 service part no 610 307 7925

Sanyo PLC-SU51 projector

Click here for step-by-step instructions on how to change the Sanyo POA-LMP65 (service parts no 610 307 7925) for the Sanyo PLC-SU51 projector.

 
 
 
 

Sanyo PLC-SU50 projector, Sanyo POA-LMP65 service part no 610 307 7925

Sanyo PLC-SU50 projector

Click here for step-by-step instructions on how to change the Sanyo POA-LMP65 (service parts no 610 307 7925) for the Sanyo PLC-SU50 projector.

 
 
 

Sanyo PLC-SL20 projector, Sanyo PLC-SL56, Sanyo POA-LMP65 service part no 610 307 7925
Sanyo PLC-SL20 projector

Click here for step-by-step instructions on how to change the Sanyo POA-LMP65 (service parts no 610 307 7925) for theSanyo PLC-SL20 projector.

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Shares