Find out which projectors are compatible with the Epson ELPLP42 and how to replace the lamp in each one
The life span of the Epson ELPLP42 projector lamp ranges from approximately 3000 hours in HIGH brightness mode to about 4000 hours in LOW brightness mode.
Warning signs
Watch for the signs that it’s time to replace the Epson ELPLP42 projector lamp:
- the image on screen gets darker and starts to deteriorate.
- projector warning lamp flashes red and keeps flashing
- a warning message “REPLACE THE LAMP” appears on screen.
6 reasons to buy an authentic Epson ELPLP42
Avoid the generic lamps being sold at discount prices on the Internet. Invest in genuine Epson ELPLP42 from an authorized dealer. Look for the seal of approval.
“Generic and compatible” are euphemisms for a knock-off, copycat technology that produces an inferior and dangerous product.
You get what you pay for and in the case of generic lamps it’s usually a long list of problems:
- shorter lamp life than original lamps
- toxic materials and carcinogenic parts including Krypton-85
- prone to explosions
- incompatibility causing damage to the sensitive electronics in your projectors
- no guarantee or refunds
- your warranty will become void
Buy this lamp on Amazon sold by these authorized dealers:
- Epson – ELPLP42 Replacement Projector Lamp for PowerLite 822+/822p/83+/83c V13H010L42 (DMi EA
- EPSON EMP-400WE Replacement Projector Lamp ELPLP42 / V13H010L42
- AuraBeam Economy Replacement Projector Lamp for Epson ELPLP42 With Housing
- ePharos ELPLP42 / V13H010L42 replacement projector lamp compatible bulb with generic housing for Epson EB-140W; EMP-280; EMP-400; EMP-400W; EMP-400WE; EMP-410W; EMP-822 EMP-822H; EMP-83; EMP-83C; EMP83H; EMP-83HE
- Genuine ALTM ELPLP42 Lamp & Housing for EPSON Projectors – 180 Day Warranty!!
Compatible Projectors
The Epson ELPLP42 projector lamp is compatible with:
Epson EB-400We, Epson EB-400W, Epson EB-410We , Epson EB-410W, Epson EMP-280, Epson EMP-410WE, Epson EMP-410W, Epson 400WE, Epson EMP-400W, Epson EMP-822, Epson EMP-822H, Epson EMP-83, Epson EMP-83H, Epson EMP-83He, Epson EX-90, Epson H281A, Epson PowerLite 410W/410WE, Epson PowerLite 400W/400WE, Epson Powerlite 822, Epson PowerLite 822+, Epson PowerLite 822p, Epson PowerLite 83V+, Epson PowerLite 83, Epson Powerlite 83+, Epson PowerLite 83C
For step-by-step instructions on replacing your Epson ELPLP42 projector lamp, click on your projector listed below:
Click here for step-by-step instructions on how to change the Epson ELPLP42 projector lamp for the Epson EB-400We projector.
Click here for step-by-step instructions on how to change the Epson ELPLP42 projector lamp for the Epson EB-400W projector.
Click here for step-by-step instructions on how to change the Epson ELPLP42 projector lamp for the projector.
Click here for step-by-step instructions on how to change the Epson ELPLP42 projector lamp for the Epson EB-410W projector.
Click here for step-by-step instructions on how to change the Epson ELPLP42 projector lamp for the Epson EMP-280 projector.
Click here for step-by-step instruction on how to change the Epson ELPLP42 projector lamp for the Epson EMP-410WE projector.
Click here for step-by-step instructions on how to change the Epson ELPLP42 projector lamp for the Epson EMP-410W projector.
Click here for step-by-step instructions on how to change the Epson ELPLP42 projector lamp for the Epson 400WE projector.
Prolong the life of the Epson ELPLP42 lamp:
Extend the life of the newly installed Epson ELPLP42 with the following tips:
- Keep your air filters clean to avoid overheating the projector.
- Turn off the Epson projector and let it stand for at least one hour ever 24 hours. An average use of four to five hours per day will ensure longer lamp life.
- Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
- Learn more with Top tips for extending DLP projector lamp life
