Your Sanyo POA-LMP90 (service part no 610 323 0726) projector lamp has between 2,000 to 3,000 hours before it needs to be replaced. This may be less if your filters are not cleaned on a regular basis.
Projectors using Sanyo POA-LMP90 (service part no 610 323 0726)
For additional savings and an enviro-friendly option, you can just replace the Sanyo POA-LMP90 (service part no 610 323 0726) bulb and re-use the lamp cage. Learn how in our video guide: Sanyo POA-LMP90 replacement lamp housing guide.
Be sure to use the correct brand projector lamp bought from a verified source that has been manufactured to meet the specifications of your projector.
Resist the temptation to buy a cheaper counterfeit model as this can damage the sensitive mechanisms in your Sanyo projectors.
See below for the step-by-step instructions on replacing the Sanyo POA-LMP90 (service part no 610 323 0726) lamps for Sanyo projectors listed above.
Sanyo Lamp Replace Indicator
Lamp replacement indicator
When the lamp life is used up and at 0 hour, the Lamp replacement icon will appear on screen, indicating that is it’s urgent to replace the Sanyo POA-LMP90 (service part no 610 323 0726) lamp.
You must wait for 90 seconds after changing Lamp Mode before you can access this option again.
Click on your Sanyo Projector for step-by-step instructions on replacing your Sanyo POA-LMP90 (service part no 610 323 0726) lamp
Sanyo projector PLC-XL40: Click here for step-by-step instructions on how to change the Sanyo POA-LMP90 projector lamp for projector Sanyo PLC-XL40.
Sanyo projector PLC-XE40: Click here for step-by-step instructions on how to change the Sanyo POA-LMP90 projector lamp for projector Sanyo PLC-XE40.
