When to replace the Sanyo POA-LMP 36

You can expect between 1,000 to 3,000 hours of use from the Sanyo POA-LMP36 (service part no 610 293 8210). when installed properly. The life cycle of this projector lamp depends on how much the projector is used and whether the air filters have been cleaned regularly. (Clogged air filters cause the projector to heat up and this puts stress on the lamp.)
Avoid knock-offs since they use inferior materials that can damage your projector. If the price of your lamp seems too good to be true–WALK away. The few dollars you save are not worth it since these lamps don’t last as long as genuine lamps and can explode inside the projector.

Looking for a less expensive option? Are you technically adept?  Watch our step-by-step video on replacing only the Sanyo POA-LMP36 (610 293 8210) bulb instead of the entire lamp housing.

Projectors compatible with the Sanyo POA-LMP36 orprojector lamp:

• Sanyo PLC-SW20
• Sanyo PCL-XW20

Scroll down for links to step-by-step instructions on replacing the Sanyo POA-LMP36 (service part no 610 293 8210) lamps for each of these projectors.
When it’s time to replace the Sanyo POA-LMP36 (service part no 610 293 8210), your projector’s Lamp Replacement Indicator will turn yellow. Be sure to buy an genuine projector lamp. It’s worth paying the few extra dollars to be guaranteed a projector lamp that will work and will keep your warranty intact.

For step-by-step instructions on replacing your Sanyo POA-LMP36 (service part no 610 293 8210) lamp, click on your model listed below:

Click here for step-by-step instructions on how to change the Sanyo POA-LMP36 (service part no 610 293 8210) projector bulb for the Sanyo PLC-SW20 projector.

 
 
 

Click here for step-by-step instructions on how to change the Sanyo POA-LMP36 (service part no 610 293 8210) projector bulb for the Sanyo PCL-XW20 projector.