Replacing the lamp in your Epson Ensemble HD 1080 projector

Written by
  • Shelagh M.
  • 10 years ago

Epson-Ensemble- HD-1080-projector-Epson-ELPLP39-lampLearn what’s involved to replace the Epson ELPLP39 in the Epson Ensemble HD 1080 projector.

You’ll need to contact the Epson hotline to find a qualified service agent. The Epson Ensemble HD 1080 projector lamp is not one you can replace yourself.

Check lamp hours

You can determine if the Epson ELPLP39 needs to be replaced. In order to access the Checking Info Menu
If you have access to the Epson Ensemble HD 1080 INFO menu, you’ll need the original remote control.
If you no longer have the original remote that came with the Epson Ensemble HD 1080, you have to use the buttons on the projector control panel to access the INFO menu. Removed the bottom of the projector enclosure to access the control panel.
You can also check the warning light on the projector’s control panel. If the warning light is flashing red at half-second intervals the Epson ELPLP39 lamps needs to be replaced.
To use the Epson Private Line Support service call 800-637-7661 and enter the PIN on the EPSON support card that came with your projector. You can also speak with a projector support specialist at 562-276-4394. Both lines are open from 6 am to 6pm Pacfic Time. The support website can be reached at epson.com/support

Buy authentic lamps

You have your project ready for changing the lamps but buying an authentic Epson ELPLP39 lamps. Don’t buy the “generic” lamps who claim their discounted lamps are equal to an OEM lamp. Look for the seal of approval and buy from an authentic manufacturer.
You pay for what you get and in the case of lower-priced generic lamps it’s a long list of problems:

Save yourself unnecessary headaches and buy an authentic Epson ELPLP39 from a recognized dealer. You’ll be getting a far superior product and tech support from an OEM manufacturer. Learn the 7 Ways to Spot a Counterfeit Lamp.

Tips for extending Epson ELPLP39 lamp life

Get more hours from your Epson ELPLP39 lamp by following these maintenance tips:

  • Keep your air filters clean to avoid overheating the projector.
  • Turn off the Epson Ensemble HD 1080 projector and let it stand unused for at least one hour ever 24 hours. An average use of four to five hours per day will ensure longer lamp life.
  • Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
  • Learn more with Top tips for extending DLP projector lamp life.

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Shares