When to change your POA-LMP106 projector lamp

Written by
  • Shelagh M.
  • 13 years ago

Sanyo POA-LMP106 (service parts no 610 332 3855)/Wondering when to change the Sanyo POA-LMP106 (service parts no 610 332 3855)?

Your Sanyo POA-LMP106 (service parts no 610 332 3855) projector lamp has between 2,000 to 3,000 hours before it needs to be replaced. This may be less if your filters are not cleaned on a regular basis.
Replace_Bulb_Keep_CageFor additional savings and an enviro-friendly option, you can just replace the Sanyo POA-LMP106 bulb and re-use the lamp cage. Learn how in our video guide: Sanyo POA-LMP106 replacement lamp housing guide.

Projectors using POA-LMP106

XE45
PLC-SU70/PLC-XU73
PLC-XU74
PLC-XU84/PLC-XU87
Be sure to use the correct brand projector lamp bought from a verified source that has been manufactured to meet the specifications of your projector. Resist the temptation to buy a cheaper counterfeit model as this can damage the sensitive mechanisms in your Sanyo projectors.

See below for the step-by-step instructions on replacing the Sanyo POA-LMP106 (service part no 610 332 3855) lamps for Sanyo projectors listed above.

Sanyo Lamp Replace Indicator

PLC-SU70/PLC-XU73/PLC or PLC-XE40/PLC-XE45 or PLC-XU74 or PLC-XU83/PLC-XU86 or PLC-XU84/PLC-XU87 Lamp replacement indicator
As the lamp reaches its end of life, the Lamp Replace indicator lights turns yellow and starts to blink.
When the lamp life is used up and at 0 hour, the Lamp replacement icon will appear on screen, indicating that is it’s urgent to replace the Sanyo POA-LMP106 (service parts no 610 332 3855) lamp.
PLC-SU70/PLC-XU73/PLC or PLC-XE40/PLC-XE45 or PLC-XU74 or PLC-XU83/PLC-XU86 or PLC-XU84/PLC-XU87 lamp repalcement icon
You must wait for 90 seconds after changing Lamp Mode before you can access this option again.

Click on your Sanyo Projector for step-by-step instructions on replacing your Sanyo POA-LMP106 (service parts no 610 332 3855) lamp:

 
Sanyo PLC-XE45 projector, Sanyo POA-LMP106 610 332 3855
 

Sanyo projectors PLC-XE45

Click here for step-by-step instructions on how to change the Sanyo POA-LMP106 (service parts no 610 332 3855) projector lamp for the Sanyo XE45 projector.
 
 
Sanyo projector PLC-XU74, Sanyo POA-LMP106 (service parts no 610 332 3855)/ Sanyo POA-LMP90 (service part no 610 323 0726)

Sanyo projectors PLC-XU73/PLC-SU70

Click here for step-by-step instructions on how to change the Sanyo POA-LMP106 (service parts no 610 332 3855)  projector lamp for the PLC-SU70/PLC-XU73 projector.

 
Sanyo projector PLC-XU74, Sanyo POA-LMP106 (service parts no 610 332 3855)/ Sanyo POA-LMP90 (service part no 610 323 0726)

Sanyo projector PLC-XU74

 
 
 
Sanyo projectors PLC-XU84/PLC-XU87, Sanyo POA-LMP106 (service parts no 610 332 3855)/ Sanyo POA-LMP90 (service part no 610 323 0726)

Sanyo projector PLC-XU84/PLC-XU87

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Shares