Lifespan of the Sanyo POA-LMP24 projector lamp

Written by
  • Shelagh M.
  • 10 years ago

Sanyo POA-LMP 24 projector lamp, Sanyo POA-LMP24 (service part no 610 282 2755)
You can expect between 1,000 to 3,000 hours of use from the Sanyo POA-LMP24 (service part no 610 282 2755) when installed properly.
The life cycle of this projector lamp depends on how much the projector is used and whether the air filters have been cleaned regularly.
(Clogged air filters cause the projector to heat up and this puts stress on the lamp.)
 
 
 

Projectors compatible with the Sanyo POA-LMP24 projector lamp:

 

Video_Sanyo_bulb_replacementLooking for a less expensive option? Are you technically adept?  Watch our step-by-step video on replacing only the Sanyo POA-LMP24 (service part no 610 282 2755) bulb instead of the entire lamp housing.

Scroll down for links to step-by-step instructions on replacing the Sanyo POA-LMP24 (service part no 610 282 2755) lamps for each of these projectors.
 
When it’s time to replace the Sanyo POA-LMP24 (service part no 610 282 2755), your projector’s Lamp Replacement Indicator will turn orange. Be sure to buy an genuine projector lamp. It’s worth paying the few extra dollars to be guaranteed a projector lamp that will work and will keep your warranty intact.
Avoid knock-offs since they use inferior materials that can damage your projector.  If the price of your lamp seems too good to be true–WALK away. The few dollars you save from a generic knock-off are not worth the savings since these lamps don’t last as long as the genuine lamps, can explode inside the projector, void your warranty.

For step-by-step instructions on replacing your Sanyo POA-LMP24 lamp, click on your model listed below:
 
Sanyo PLC-XP17 projector, Sanyo POA-LMP24 (service part no 610 282 2755)

Click here for step-by-step instructions on how to change the Sanyo POA-LMP24 (service part no 610 282 2755) projector lamp for the Sanyo PLC-XP17 projector.

 
 
Sanyo PLC-XP18 projector, Sanyo POA-LMP24 (service part no 610 282 2755)

Click here for step-by-step instructions on how to change the Sanyo POA-LMP24 (service part no 610 282 2755) projector lamp for the Sanyo PLC-XP18 projector.

 
 
 
Sanyo PLC-XP20 projector, Sanyo POA-LMP24 (service part no 610 282 2755)

Click here for step-by-step instructions on how to change the Sanyo POA-LMP24 (service part no 610 282 2755) projector lamp for the Sanyo PLC-XP20 projector.

 
 
 
Sanyo PLC-XP21 projector, Sanyo POA-LMP24 (service part no 610 282 2755)

Click here for step-by-step instructions on how to change the Sanyo POA-LMP24 (service part no 610 282 2755) projector lamp for the Sanyo PLC-XP21 projector.

 
 
 

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Shares